Versatility
Standard stock safes range in size from
26-inches high to 74-inches high.
Special sizes are available to meet any customer’s needs.
Options include special VSI locking configurations, adjustable or fixed shelves, depository configurations and special interiors.
Standard colors are beige, black and tan.
Special colors are available to match submitted paint samples.
Secure Construction
TL30 safes from VSI are
Underwriters Laboratory rated.
TL30 safe bodies are constructed using ½-inch 100K PSI, high tensile steel.
All doors are composite material, similar to our Hercvlite panels, with a metal skin.
Overall thickness of the door is 2 ½ inches.
Allow 3 ½ inches to include locking.
Group 2 U.L. combinations are standard.
Installation
Safes are shipped crated and normally require professional installation.
Safes weighing less than 750 lbs. must be fastened to the floor.
Standard Features
2 ½-inch Composite and Steel Door
½-inch High Tensile Steel Body
Special VSI Locking Design
Special VSI Hinge Design
Epoxy Paint Finish
U.L. Listed
Support Beams
Access and installation restrictions normally limit the maximum length of panels to 13 feet, regardless of class.
To accommodate these restrictions, the standard maximum length of panels is set at 13 feet and an I-beam is required for spans exceeding 13 feet.
Modular support walls support the I-beam, and the panels are inserted into the beam channel
and welded.
Please contact engineering if your needs require longer panels.
Support Columns
When a vault requires beams that exceed 24 feet, a support column is sometimes required. VSI recommends cambering of the beams.
3640 Work Drive | Fort Myers, FL 33916
Telephone: 239-332-3270 | Toll Free: 800-226-3990
Fax: 239-332-5593 | © Copyright 2020